Sunday, 17 May 2015

Technology Turns Touchscreen Displays Into Biometric Scanners


bodyprint
Some of the researcher representing and working at the Yahoo Labs have developed a very affordable alternative to the current fingerprint sensors available on the phone. They have developed a biometric system which is being called as the Body print. This biometric system will only require the capacitive touch screen displays of the devices to authenticate the body parts of the user.

However, on the down side, since the touch screen displays have lower resolution of the input when compared to other specialized sensors, the new biometric system will require the user to make use of the larger parts of their body. The user will simply have to press any of these parts on the screen to get access to the device. This biometric system not only works as a security gatekeeper for the phone, but is also has many other benefits and applications. This system has perfect ability to recognize the fist, ear, set of five fingers, phalanges, and the palm of the user.

Applications of the new biometric system: 

A simple example of this biometric system application is the fact that the user can configure the device system to only answers calls when the device has been able to detect the ear of the users pressed to the phone. Body print that was recently launched at the 2015 Computer-Human Interaction Conference (CHI) in Seoul, South Korea was able to accurately identify different parts of the human body as well as the owners of the system for nearly about 99.98 percent of all the times during all the tests that was conducted using 12 participants. But if it is important that the creator is this biometric system and his team, try and test this system on a wider scale before it can be released for commercial use. This application is perfect to keep the files and documents saved from inquisitive people.

This creation has come as a new breather for many companies who are still afraid to try on the biometric systems. Not many companies have tried to take complete advantage of the full potential of this system. Most of the latest smartphones are built with the fingerprint biometric system and how might be the perfect time for all these companies to raise the bar a bit higher.

In present all the finger print scanners are available on some of most high end phones but the Body print will allow all the smartphones have all the features of a biometric system.

This firm is not only innovating latest technology but also planning to extend its research in the field of technology, as Marissa Mayer, who is the CEO of Yahoo stated that firm might compete with the other leading technology of same field such as; voice-based virtual assistants or Cortana of Microsoft, Siri from Apple or Google Now from Google. It is expected that Bodyprint will arrive in the market in the form of app to support touch screen of almost all smartphones.

Movavi Screen Capture Studio for Mac Review


Screen_Capture
Technological developments do not stop with a particular device, but there are chain reactions that bring in lots of other apps and software that can be used for specific OS or devices. One such magnificent software is Movavi, a screen capture for Mac 9 software. So, what’s all about this software, for sure is the next question you are eager to ask! After all, with too many software and apps, getting to know about a much-appreciated product is certainly on the cards of many.

Why Movavi Screen Capture is the Best? 

Movavi works for both Mac OS and Windows. The Mac users can find this software easy to use when it comes to editing the videos, and add transitions to the video footage. There are large numbers of products that can help to do the same, but what makes Movavi best is the efficacy. The users can trim, cut, and split the video footage with this software.

Another great feature about Movavi screen capture for Mac 9 is that the users can find other numerous products that help in saving the Skype calls and messages. The video that runs on the computer screen can be saved and you can set a timer so that your physical presence is not required.

The best thing about Movavi is that it lets the users do all these in the most cost efficient manner. Users can view, create and convert videos using this software. Sharing the video footages is the primary reason why they are modified. For instance, all the movie clips come around in the social media for any relevant scenario. The youngsters find it a vogue of the day, and if you love to share what you think about the funny video clips, make use of Movavi. Sharing what you have cut and trimmed is easy with this software. Recorded screencast videos too can be created with this software.

How it Works?
  • You need to start with setting the parameters on the screen, and for this set the required frame. Then adjust the recording area. Then capture the audio from the source, and then the software capture the mouse and keyboard actions.
  • Record the screenset, and grab them while recording. Then set the timer to avoid your physical presence.
  • The video quality can be enhanced by editing, and you can also add music and stylish changeovers.
  • You can also save the video in supported format of your PC. You can view the same in the smartphone by using the mobile presets.
To download this software on the Mac system, you need 1 GB free space for the proper operation of the software. You need to have admin permissions to install the software in the system.

Verdict 

Compared with most of the programs available, the movie screen capture studio offers lots of editing features. Many users would love to stamp the videos created with their sign. Adding watermark is one of the ways to ensure that piracy is stopped. You can make use of the Movavi software to include watermarks and title in the videos. Your presentation looks unique with these enhancements. Adding another feather to the cap is the time to time discount campaigns running with this unique product to make it more desirable and cost-effective.

Friday, 15 May 2015

Smartphones Could Be Used to Detect Earthquakes


Earthquake_warning
Smartphones – Used as Initial Warning Signals for Earthquakes

According to a latest research, smartphones could now be used as initial warning signals for huge earthquakes. The built-in GPS sensors in the smartphones could help in detecting the quakes, giving several seconds of warning to people living in the vicinity which would be yet to be hit by earthquakes. The smartphone can detect big earthquakes with magnitude of 7.0 or larger as per the study published in the journal Science Advances.

The study indicate that the technique `crowdsourcing’, could be useful in sections of the world, which are vulnerable to quakes, in the absence of costly warning systems. With crowdsourcing observations from user’s smartphones, one can detect earthquakes, analyse and customize quake warnings which can be transmitted back to users. According to LiveScience, the system is still to be tested though a pilot project is scheduled later this year in Chile.

Geophysicist, Kristine Larson, of the University of Colorado, Boulder, states `what is really nice about this work is they are using sensors that people carry around anyway and it could be very useful’. Prior to an earthquake,a little bit of warning could help the people in seeking some help by taking shelter, nuclear power plants could take last minute precautions and natural gas utilities could shut down pipelines.

Crowd sourcing Earthquake Initial Warning System 

Japan has an early warning system which relies on over 1000 seismometers all over the country thus saving lives during the magnitutde-9 Tohoku earthquake which hit in 2011. Mexico too has a similar system while another is under research in California. Though these systems could be time-consuming and expensive to install together with maintenance, cell phones could be an attractive choice in case of earthquake prone countries in developing world.

Earlier research of crowdsourcing earthquake initial warning systems have trusted on phones’ accelerometers that estimate the phone’s movement instead of GPS tracking locating the position of the phone with satellites. Though scientific GPS stations have been utilised in detecting earthquakes, the new study indicate that consumer devices with GPS could also be useful for crowd sourcing signals. Since most of the prevailing devices integrate GPS navigation which also includes vehicles, increasing amount of data could enhance the sensitivity of these efforts.

To comprehend if smart phones and other consumer devices could identify quakes with GPS, researchers tested the sensitivity of these devices. The cell phones tend to use a typically coarser method of positioning than the most sensitive scientific instruments that take advantage of more information that is encoded in the GPS signal.

Consumer GPS Devices – Identify Earthquakes of Magnitude 7 & Above

They studied the accuracy of cell phone GPS on shaking the phone, matching its recorded displacements with more accurate scientific device and monitored the phone for movement while holding it stationary and measured the chance for false alarms. The scientist believed that consumer GPS devices could identify earthquakes of magnitude 7 and above enabling probable warnings to people located away from the epicenter of the most critical earthquake, as reported in Science Advances.

Thereafter they tested the concept by using a computer stimulation of a magnitude-7 earthquake near Oakland, California on the Hayward fault, a probable area for future tremors which runs through the San Francisco Bay Area. On stimulating the typical response of cell phones shaking, they appraised the signals in cell phones near epicentre.

As per the researcher’s system, a quake activates a phone if the same and four adjoining devices tend to record instantaneous movements which could be greater than 5 centimetres. To clear out coincidences, the system tends to issue only an alert if more than 100 devices tend to see such causes.

Adequate Data –Improvement in Warning Potentials

Presuming data from 0.2% of population, less than 5000 people, the system was capable to identify the stimulated earthquake within five seconds a speed enabling a few seconds of warning prior to the strongest shaking started in San Francisco and 10 seconds before it started in San Jose, thus giving time for children to get beneath their desks and for trains to come to a halt.

They then tested their system with real data from Tohoku quake and used an array of 462 GPS stations all across Japan to estimate the data coming from cell phones. Though scientific instruments tend to be more precise than cell phones, they record lower quality data too which is same to data from consumer devices. With enhancement in technology and more devices integrate GPS tracking; this system could turn out to be more useful according to study author, Benjamin Brooks, an earthquake scientist in the U.S. Geological Survey in Menlo Park, California.

He states that `it is not really just about smart phones, it’s about all sorts of internet connected devices that have positioning associated with them – and think the numbers are going to be so large that one could be very liberal with criteria for using a specific device’. Detecting with cell phones could be difficult since users are always on the move though with adequate data, the system could depend on devices which are not in motion prior to the quaking thus improving the warning potentials.

Navy Will Test Its Electromagnetic Railgun aboard DDG 1000


 

Railgun

The New Electromagnetic Rail Gun Weapon


According to officials, `the navy is speculating whether to mount the new Electromagnetic Rail Gun weapon aboard the high tech DDG 1000 destroyed by mid 2020a. As reported by Program Manager for Directed Energy and Electric Weapon Systems, Capt. Mike Ziv, at the Navy League’s 2015 Sea Air Space symposium at National Harbour, Md., the DDG 1000’s Integrated Power System has been providing a huge amount of on board electricity adequate to accommodate the weapon.

The first of the three planned DDG 1000 destroyers was named in April last year. Ziv had reported that Navy leaders were of the belief that the DDG 1000 is the right ship to house the rail gun though the additional study was essential to examine the dangers. A difficult study on the same should be completed by the end of this year according to Ziv. He further adds that he thinks that it is an ideal platform and there is little bit more work to be done to understand the details.

 The DDG 1000 is said to be 65% larger than the prevailing 9,500 ton Aegis cruisers and destroyers with a displacement of 15,482 tons.

Plans to Test Fire Electromagnetic Rail Gun At Sea – Summer 2016

The integrated power system of the DDG 1000 that includes its electric propulsion enables to generate about 58 megawatts of on-board electric power probably seen as key to the future with regards to the possibility of firing a rail gun.

There is a possibility that someday, the weapon could be configured to fire from DDG 51 Arleigh Burke class destroyers. The Navy has plans to test fire its new Electromagnetic Rail Gun for the first time at sea, in summer of 2016 from on board the USNS Trenton, which is a Joint High Speed Vessel, according to service officials.

Test shots would take place at Eglin Air Force Base, Fla; and at the time of the test, the rail fun would fire a series of GPS guided hypervelocity projectiles at a barge floating on the ocean around 25 to 50 nautical miles away.Ziv informs that `they would be firing it against a floating target and they are trying to gauge the ability of engaging a target over the horizon. Moreover they are also going to have a gradual ramp up and gather data. This would be a significant event though it is also a key learning point’.

Wide Range of At-Sea/Land Based Application

The Navy is said to be developing the rail gun weapon for a wide range of at-sea as well as possible land-based application, according to Ziv and the weapon can fire guided, high speed projectiles more than 100 miles, making it suitable for cruise missile defense, ballistic missile defense and various kinds of surface warfare applications.

 Besides this, the rail gun utilises electrical energy to develop a magnetic field and propel a kinetic energy projectile at Mach 8.5 towards a wide range to target something similar to an enemy vehicles or ballistic missiles and cruise. The weapon is said to operate when electrical power charges up a pulse forming network.

The pulse forming network comprises of capacitors that are able to release large quantity of energy in a short span of time and releases a current on the order of 3 to 5 million amps which is 1,200 volts released in a ten millisecond time frame.

Tuesday, 12 May 2015

Elon Musk Unveils Tesla's World-Changing Powerwall


Elon_Musk
Elon Musk, CEO of Tesla Motors on announced on Thursday the plans of the company to develop both the residential as well as business battery systems which include the business-oriented Powerpack and the Powerwall Home Battery. Musk added that these power systems are being developed in coordination with the solar panels with the goal of storing energy to be used some other time. These systems are capable of drawing power from the grid whenever there is a decrease in the demand of electricity and they will discharge the same during higher demands and at much expensive rate per units. He also added that these systems will help in reducing the amount of dependence we show on the fossil fuels and also benefit the people who are out of the power grid.

The Power-wall: 

The Powerwall is expected to available in the form of 10kWh system that has been optimized to provide backup applications and also as 7kWh solution for daily use. Once both these are connected to the grid or the solar panel, they are ready to give backup power. When these are paired with the solar power options even the 7kWh Powerwall can be easily used for extending the cost and environmental benefits of solar into multiple hours of usage. These can be mounted home garage wall and being lithium-ion battery packs they can provide backup even during fluctuation in the grid. The Powerwall is expected to available sometime later this year and has been priced at US$3,500.

Brilliant idea: 

The benefits of batteries are unlimited as they help in load shifting during low rate periods, they can even store abundance of solar power and even provide sufficient backup during outages. Powerwall is the combination of all these benefits making them the USPs for the battery system. With the increase in the prices of utility these batteries will provide lots of relief. Customer can go back to using the grid during the off peak periods.

Powerwall
Benefits Vs Costs: 

Pricing plays a very significant role here and both the residential as well as business industry might get a light jolt with the current pricing of the battery. Even though the current pricing of these power systems is comparatively very low to what anyone would have expected. Powerwall has the potential to change the entire energy policy around the globe.

Challenges that can be expected in the future:

Despite the number of benefits that can be availed through the system, it might have to cross some hurdle in the future. The biggest one is expecting discernible impact by up scaling of the manufacturing industry. So numerous building and companies in America it might take years for the systems to be installed everywhere. It might be quite difficult for consumers to learn everything about using the system. The company need to work on reducing the cost per unit and make it more reasonable. Company might face further difficulty in collection and analysis of the consumer usage data.