Friday, 31 March 2017

Car Genie: AA Device Predicts Car Breakdowns Before They Happen

Car Genie
It is quite risky if our car suddenly collapses or breaks down. Most of the car owners know that it is not possible to detect any potential breakdown in advance. But, now, you may be able to get rid of such risk, while you are driving your car. With the significant development in automobile industry, there is an introduction of a special tool, Car Genie. It helps in predicting the breakdown prior to anything happens to you.

You know that many of the modern car engineering experts have tried to reduce the risk of breakdowns, while manufacturing the vehicles. However, Automobile Association of the United Kingdom has attempted to give the utmost assistance to the car owners with its new tool, Car Genie. This company works with the aim of reducing the incidents of car collapse as much as possible.

Use Car Genie in a simple way-

The latest device Car Genie, allows self-installation process, and it is to be plugged to the on-board diagnostics point of a vehicle. Users have to install software, which enable them in realizing the probability of breakdown. The system has an ability to interpret EOBD of a vehicle instantly. Then, it delivers all the data to the related software. It also gives notification, which may be seen by driver after or before operating the car.
Car Genie has turned out to be the most advanced product of AA. The company has taken the right step to prevent customers from vehicle breakdown risk. This device will be accessible exclusively to AA associates from May in 2017.

Trials arranged by AA to test the product Car Genie-

Almost 10,0001 car drivers have been involved for the trial of this new tool. AA may also show much data to prove that they are striving to assist drivers in making out the faults at a very early stage. These faults include battery degradation and overall condition of vehicle.

At the time of making experiment, all the faults are tracked in cars of users, and they are related to ignition system, EGR and also air flow. With the identification of faults, it is also possible to analyze the system faster and find out the remedy immediately.

It may save the car owners from hazards and inconvenience, while they are on the highway. Moreover, after sending notifications and recommendations, the company may also provide support by calling their members. They help drivers in repairing the issue.

Within few minutes, as the users can get advice, they may continue the trip again. The outcomes of trial have revealed that almost 49 percent of drivers comprehend problems with vehicle. 66 percent of the vehicle users know the way of driving automobile economically. However, 47 percent of the car owners have informed that Car Genie is good to make their driving safer than before.

As the app collects data on location and driving mode of users (such as, speed, acceleration or braking), some skeptics may consider it to be a privacy risk. But, it is hoped that most of the car drivers will accept it in future.

Printable Sensor Laden Skin for Robots

Gold Bug robot skin
According to several studies this decade has seen maximum technological advancements in the past 50 years. The radical positive changes in technology have made this the age of tablet computer and Smartphone. This is the era of touch sensitive surfaces and they’re so fragile that anyone with a cracked Smartphone screen can easily attest to the fact. While touch sensitive phones or TV devices seems possible, covering a bridge, airplane or a robot with sensors would require technology that’s both lucrative and lithe to manufacture.

Creation of a new device 

However, our world-renowned scientists are known for their superficial capability and unending endeavors to create something new. A group of dedicated scientists at MIT’s CSAIL or Computer Science and Artificial Intelligence Laboratory have devised that 3D printing could make the work possible. The researchers tried to demonstrate the viability of printable and flexible electronics that combine processing circuitry and sensors. The amazing fact is that the researchers were actually able to create a device that would react to mechanical changes by altering its surface color.

The scientists found as their inspiration, ‘goldbug’ or more commonly known as the golden tortoise beetle that changes its color from golden to red, when prodded or poked. This reaction in both the beetle and the new device is caused by the mechanical stresses. MIT graduate Subhramanium Sundaram says, that the network of interconnects and sensors are called sesnsimotor. Sundaram, who led the project, said that their attempt was to try and replicate sensimotor pathways and install it within a 3D printed project. So, in their attempt to make their vision possible, they considered testing the simplest organism they could find.

Several scientists made it possible 

To demonstrate their new concept and design, the researchers presented their concept in Advanced Material Technologies. Along with Sundaram who is the first author of the paper, were his senior associates like professor of EECS Marc Balbo, and associate professor Wojciech Matusik. Others who joined the paper include technical assistant in MCFG David Kim, an EECS student named Ziwen Jiang, and a former postdoc, Pitchaya Sitthi Amom. A type of plastic substrate is used to deposit flexible circuitry on printable electronics and for decades this has been a major area of research. According to Sundaram the range of the device itself greatly increases once the print in put on the substrate.

However, he also says that the types on materials on which the print can be deposited get limited by the choice of substrate. This happens because; the printed substrate would be created by combining different materials, interlocked in complicated but regular patterns. Hagen Klauk who is a world-renowned scientist at Max Planck institute is quite impressed by the creation of this concept. According to him, printing an optoelectronic system that too with all the components and substrate by depositing all the liquids and solids is certainly useful, interesting and novel. Further, the demonstration of this method makes the system functional and proves this novel approach is 100% possible. This approach will lead to improvised manufacturing environments, and dedicated substrate materials will no longer be available.

Thursday, 30 March 2017

Best Web Design Agency for Small Businesses

1
Magicdust – Web Design Agency for Small Businesses

Magicdust is one of those web design agency for small businesses who are need of a website in Melbourne. From the start their purpose was to bring the power of the internet into the hands of the consumers. The agency in question has been functioning since 2006 and has so far designed around 6,000 websites. Their trademark is affordable, high quality web design where they interact with small businesses in Melbourne and all across Australia. Their focus is in assisting small business owners in promoting their business through the internet. With their dedicated services to these entrepreneurs they have effectively been one of the most leading web design and expansion establishments in Melbourne. The websites created by them is said to be outstanding enabling the entrepreneur to progress in their business which is done by keeping updates on the prevailing online marketing trends together with amazing web designs. The Website Design Melbourne ensures to take into account the details pertaining to their business and their objectives as well as attempting to obtain some insights with regards to their competitors. With these details in mind, the website has been designed which is said to be appropriate for the said business. At the onset the website comes with an online strategy based on small business goals. It begins with the brand moving towards the expansion of the website and then followed by the marketing support.

Website Built in WordPress

The website is built in WordPress, which is an appropriate platform in presenting business content, newsletters and blogs, menus, subscription memberships, prices together with industry detailed functionality and much more. If ecommerce is needed, a strong full-function online storefront is created which is designed especially in managing and selling the products online. The website is thus created as per the entrepreneur’s decisive vision in mind making it easy to tread on the right track. Equipped with a team comprising of account managers, developers, designers, marketers together with strategist based in Melbourne, they tend to be highly professional in planning a website for the progress of a business. WordPress which is a search engine friendly is said to be in-built as well as easy to be used and is considered to be helpful in enhancing the business. Utilising WordPress content management system – CMS, they offer easy options in managing the content which can go on the site, while regulating the same from time to time.

Unlimited Guarantee

Their unlimited guarantee comprises of-

  • Unlimited pages 
  • Unlimited design revisions 
  • Unlimited products 
  • Unlimited technical support 
  • Unlimited email forwarders and accounts
The agency is said to have a great repute wherein they have catered to over 1000 Melbourne miniature businesses to come on-board in their business. With the help of unlimited design revision, they tend to provide designs to the complete satisfaction of their consumers with great quality web designs. The content management system enables the entrepreneur to have complete control of the website. Another added benefit is the affordability wherein besides providing quality websites, the pricing seems to be quite reasonable. Great customer support is rendered from their experienced and friendly team based in Australia whenever the need arises.

Stanford Scientists Reveal How Grass Developed a Better Way to Breathe

Grass
Stomata – Holes in Leaves of Plant – Take in CO2, Give Out Oxygen


When we recall our first lesson in photosynthesis we think of the stomata, the holesin the leaves of plants which tend to take in carbon dioxide giving out oxygen together with water vapour. During the 400 million years from the time the plants inhabited the land, these holes seemed to stay unchanged but for one main exception namely grasses.

The plants that tend to make up around 60% of the calories which people consume all over the world is said to have a modified stoma which experts are of the belief that it makes them capable of withstanding drought or even high temperature.

An increased productivity of grass stomata has now been confirmed by Stanford University scientists who have gained some knowledge on how they tend to grow. Their discoveries, conveyed in the issue of Science of March 17 could be beneficial in cultivating crops that would flourish in a changing climate.

Professor of biology and senior author of the paper, Dominique Bergmann, stated that eventually they have to feed people and the climate is changing, regardless of the cause, they still tend to depend on plants in order to survive irrespective of the climate they may have.Grasses that comprise of corn, rice and wheat tend to develop various stomata that could have been helpful in spreading at the time of prehistoric era of improved global dryness.

Food & Agriculture Taken for Granted


Stomata tends to have two supposed `guard cells’ having a hole in the centre which opens and closes based on how the plant requires to steady its gas exchange. Should the plant require more carbon dioxide or needs to cool with the release of water vapour, the stomata tends to open and if it needs to conserve water they then are inclined to remain closed.

The unusual structure of the grasses improved on recruiting two extra cells on each side of the guard cells, enables little additional spring with the opening of the stomaalso tends to respond much more quickly and sensitively to changes in light, temperature or humidity which occurs in the course of the day. Scientists expect that by being aware on how grass developed this system, they would be capable of creating or selecting edible plant which could endure dry as well as hot environments that would probably be more predominant with the changes in climate.

According to Michael Raissig, a postdoctoral research in the Bergmann lab and lead author of the paper commented that they take food and agriculture for granted and it is not something the `first world’ had to deal with but there were still large areas of the world that suffer from famine and this would be on the rise.

Unusual Stomata of Grasses – Extra Efficient `Breathers’


Moreover the human population would be exploding in the next 20 to 30 years, most of which would be in the developing world which is also where the changes in climate would be having the major effect.

As per the scientists, the unusual stomata of the grasses tend to make the plants extra efficient `breathers’. The researchers, however urged by curiosity together with a desire for developmental biology, planned to test that theory. They located a mutant of wheat relative Brachypodium distachyon which had two celled stomata. In association with the Berry lab at the Carnegie Institution for Science, the team then compared the stomata from the normal four celled stomata to the mutant.

They not only confirmed that the four-celled type seems to open wider and faster but identified which gene had created the four –celled stomata, though it was not the gene they were expecting. Raissig stated that since it was a grass specific cell type they were of the belief that it would be a grass specific factor also. Rather than depending on a totally new mechanism, the recruitment of the additional cells appears to be organised by a well-studied factor known to switch other genes on and off.

Wheat Brachypodium


That factor in other plants seems to be present in guard cells where it is involved in their progress. The team discovered that in grasses the factor migrated out of guard cells and directly into two surrounding cells, recruiting them in the formation of the four-celled stomata.

From the evolutionary period, humans have produced and propagated plants which had produced the types of food they desire and which could survive the extreme climate. Dominique Bergmann, also a Howard Hughes Medical Institute investigator commented that they were not consciously breeding for stomata though they had been unconsciously selecting them.

He further added that they wanted something which is more drought resistant or something which could work better in higher temperature, or something which is just capable of taking in carbon better and often what they tend to actually do is select for numerous properties of stomata.

In the research led by Bergmann, the researchers utilised a relative of wheat Brachypodium in demonstrating that all grass stomata having four-cell configuration inclusive of two subsidiary cells were more responsive to changed environmental condition, having a wider range of holes for opening and closing of pores and it was this sensitivity which probably improved the performance of the plant especially in high temperatures or famine conditions.

Gene – BdMUTE


Moreover, the team comprising of lead author Michael Raissig together with the others, utilised sophisticated research techniques in identifying specific gene which enabled Brachypodium to form the imaginative subsidiary cells. The gene known as BdMUTE, encodes a protein which is said to be a `master regulator’ of cell behaviour by turning on and off the other genes which tend to give the cells their exceptional properties.

Deprived of the master regulator, Brachypodium stomata looks like the primitive two-celled stomata which is located in other plants. According to the scientists, due to the flexibility together with the productivity of grass, it seems to make the understanding of this plant family dangerous for the survival of humans.

Irrespective of genetic modification or selective breeding, scientists someday would be capable of using these discoveries in producing the other plants with four-celled stomata. Besides, this could also be one of the several changes, to chloroplasts or enzymes, for instance which would be helpful for plants photosynthesize much more in an efficient manner in feeding an ever growing population.

The research had been financed by Swiss National Science Foundation, The Gordon and Betty Moore Foundation, the U.S. Department of Energy, the National Science Foundation together with the Howard Hughes Medical Institute.

Is Robotics a Solution to The Growing Needs of the Elderly?


Robots – Nurses/Caretakers for Elderly

At the reception of Institute of Media Innovation, at Nanyang Technological University, Singapore, you will find a smiling brunette receptionist known as Nadine.One would not find anything unusual with regards to her appearance but on closer scrutiny you will get to know that she is a robot. Nadine is said to be an intellectual robot with the potential of autonomous behaviour and for a machine, her appearance and behaviour tends to be amazingly natural.

 She has the tendency of recognizing people together with their emotions and utilises her knowledge database, her thought in order to communicate. They have still been fine-tuning her receptionist skills, at IMI and shortly Nadine could be the nurse for your grandma. Study in the use of robots as nurses or caretakers have been mounting and it is not difficult to know the reason. Global population is getting old which is being a strain on the systems of healthcare.

 Though most of the elders in the age of 80 may need a companion to chat with or someone to take care of them in case they tend to stumble and fall, more and more of the elderly tend to suffer from serious disorder namely dementia.

Quality Care – Needs of Elderly

Several experts are of the opinion that robots could be the solution in providing the much needed quality care in addressing the needs of the elderly. Nadine is being designed by a team which is headed by Prof Nadia Thalmann who have been working on virtual human research for several years. Nadine is said to exist for three years.

According to Prof Thalmann, she seems to have human like potential in recognizing people, emotion while simultaneously remembering them. She will automatically adjust to the person as well as situations she may tend to deal with thus making her perfectly suitable in looking after the aged, according to Prof Thalmann.

Moreover, the robot is said to monitor the wel lbeing of the patient and in case of an emergency can call for help. Besides this, she can also chat, read stories or even play games. Prof Thalmann commented that the humanoid is never tired or bored and it will just do what it is devoted for.

IBM Multi-Purpose Eldercare Robot Assistant

However, Nadine is not perfect and tends to have trouble understanding accents. Her hand co-ordination is not the best. Nonetheless, Prof Thalmann states that robots could be caring the aged within 10 years. IBM, the US technology giant is said to be occupied with robo-nurse research in association with Rice University, in Houston, Texas who have developed the IBM Multi-Purpose Eldercare Robot Assistant – Mera.

 It is said that Mera can monitor the heart and breathing of a patient by analysing video of their face. Moreover it can also view if the patient had fallen and convey the information to caretakers. But not all would be prepared for a robot caretaker, admits Susann Keohane, global research leader of IBM, for the strategic initiative on aging.

 This opinion has been supported by research by Gartner which had found `resistance’ to the usage of humanoid robots in the care of the elderly. Kanae Maita, principal analyst in personal technologies innovation at Gartner Research had commented that people did not seem to be comfortable with the idea of their parents being cared by the robots, in spite of evidencethat it provides value for money.